First of all, please make sure you have turned on the device which you want to add to your account. After the yellow indicator light becomes stable, it will go online normally. Please log in to the APP with your username, then click List at the bottom of the interface, then click the plus sign…

After logging in to the App, please tap Issue, then tap Penetrate, please input “speed123456 100”, then click ok, this command will change speed limit of the speed alarm to 100km/h.You can also modify “100” to some number according to your needs.You can also input “speed123456 0”, this command will turn off the speed alarm.

If you have multiple devices, you can create an account through Reiwour GPS APP, so that you can monitor all devices at the same time. After starting the APP, please click “log in by username” in the lower right corner and click “Sign up“. Please note that when you create an account, your username must…

After logging in to the APP, please click “device info”, then click renew button below to renew for your device.Before the device expires, you will receive a notification on the APP. If the device expires for more than 3 months, it may cause the SIM card to be terminated. Please try to complete the renewal…

How to log in to the APP?Please remember that our APP Reiwour GPS supports two login methods(device ID or account). You can log in directly through your device ID and monitor a device without registering an account. Please select “Log in by device ID” in the lower left corner when logging in to the APP,…

How to set the Geofence for the GPS tracker

If you want to extend the battery life, please use the power saving mode. After logging in to the app, click “Issue”, and then click “power saving mode”.  You can also set the upload interval. In this mode, when the vehicle is stationary, the device will stop working, so it can effectively improve the battery…

First of all, please remember that our app supports two login methods. If you logged in with your device ID, please click on the device information in the APP, then click on the edit icon in the upper right corner. You can find the time zone settings at the bottom of the interface, adjust it…

First of all, please test the device outdoors in an open place. GPS can’t get signals indoors. The device can work normally without any other setting or operation after activation is completed. Turning on your device: After activating the device, please plug the device into the vehicle’s OBD port correctly before using it. The flashing…

First of all, please test the device outdoors in an open place. GPS can’t get signals indoors. The device can work normally without any other setting or operation after activation is completed , but it is recommended that you have a basic understanding of its working modes, which can effectively extend the battery life. The…

First of all, please test the device outdoors in an open place. GPS can’t get signals indoors.Regarding the installation of the device, you only need to connect the red wire to the positive pole of the battery and the black wire to GND, and the device can work normally.The orange wire is used to connect…

Hello, dear friend, Thank you for choosing Reiwour GPS. Please visit http://activate.reiwour.com Or use your phone to scan the QR code in the card in the packaging box to activate your device. Please enter your device ID according to the prompts on the page If the system detects that your device ID is correct, it…